Promote sustainability and environmental protection through the use of screen protectors

Electronic waste due to broken display

A lot of electronic waste and electronic garbage is created when a defective display has to be replaced. This is in contrast to the concept of sustainability and environmentally conscious action. What happens to the electronic waste? As a rule, defective cell phones, but also mobile data capture devices (MDE), tablets and defective notebooks, as they contain many different materials, are shredded and melted down. Defective displays are replaced with new ones. The replacement displays had to be produced using resources such as energy, rare earths and a lot of water ( the production of electronics uses a lot of water)

Complex chemical separation processes for electronic waste

Energy-intensive chemical separation processes with high water consumption separate the metals, rare earths and various plastics contained in the shredded electronic waste. This produces considerable quantities of hazardous waste sludge that cannot be processed further. The hazardous waste is either incinerated or stored in hazardous waste landfills.

Study by the Federal Environment Agency - Influence of the service life of products on their environmental impact

In a comprehensive study - Influence of the service life of products on their environmental impact: Creation of an information basis and development of strategies against "obsolescence " - from 2016, the Federal Environment Agency has already determined that the

"Products of the highly technological service society of the 21st century cause significant environmental impacts due to two factors, among others: firstly, the number of products themselves is constantly increasing and secondly, relatively short service lives can be observed in some cases."

and it goes on to say

"With regard to the long lifespan of electrical and electronic devices, the most intensive possible use of the raw materials used in the device and the environmental impact associated with their extraction should be considered an important aspect."

Display damage is expensive and replacement is necessary

Damage to a display or touchscreen is extremely annoying. The device's input center no longer works. The device is a total failure, which is almost equivalent to a total write-off.

Reducing the risk of display damage is sustainable

To minimize the risk of display damage, the use of a high-quality screen protector is highly recommended. This not only helps to avoid costly display repairs, but also to maintain the value of electronic devices. It has been proven that tablets, smartphones, but also industrial panels and touchscreens have a significantly higher resale value if their displays or touchscreens are free of scratches or damage. As the example of the defective MDE device display mentioned above shows, the lack of a screen protector or glass resulted in a completely scratched and damaged touchscreen, rendering the device, which is worth several hundred or even 1000 EUR, unusable. By using a high-quality Neoxum display film in clear or matte or an On Screen ® hybrid glass, a very robust composite material made of PET plastic (polyethylene terephthalate) and a 50 µm thick 9H tempered glass coating, the service life of a device can be significantly extended. The durability of a touchscreen or display is significantly optimized, scratches are effectively prevented and the formation of defective spots on the touchscreens caused by the constant use of the same function is avoided. Since there is no wear-related damage, costs and time are saved.

Repairing a display damage

Repairing a display damage can often take days or even weeks. In addition, a high-quality screen protector also offers the advantage of better visibility. Special coatings such as anti-glare or anti-fingerprint reduce light reflection and minimize fingerprints, so that the display is clear and legible even in direct sunlight or in bright environments.

Correct handling of the device - a protective case is mandatory

Another aspect that should be considered when reducing the risk of display damage is the correct handling of the device. It is important to handle the device carefully and to protect it from bumps, falls or other physical impacts. A good protective case, e.g. for Andys and tablets, protects not only the device itself, but also the display, provided the cover protrudes 1-2 mm above the display itself. If the phone or tablet accidentally falls on the screen, the slightly protruding edge of the protective cover will absorb the impact and the screen will remain undamaged in most cases. When buying, look for high-quality materials such as TPU (thermoplastic polyurethane), which is both strong and flexible enough to cushion a fall. Rigid, solid protective covers such as those made of PC (polycarbonate) tend to be unsuitable as they are not as elastic as TPU and cannot absorb impacts and falls as well.

Cleaning the screen

In addition to using a screen protector and handling it correctly, regular cleaning of the screen can help reduce the risk of screen damage. Dust, dirt and other particles can accumulate on the screen and cause scratches. With a soft microfiber cloth and a mild cleaning agent (it is best to use a screen cleaner and test it for compatibility beforehand), these particles can be safely removed without damaging the display.

Conclusion: Reduce the risk of display damage - act sustainably

Overall, it is important to minimize the risk of display damage, as this can not only avoid expensive repairs, but also maintain the value of the device. By using a high-quality screen protector, handling it correctly and cleaning it regularly, the risk of display damage can be significantly reduced.